Ultrasonically cleaned them.
One screw didn't want to come out.
Needle valves are unworn.
and checked all passageways.
One screw didn't want to come out.
Very interesting stuff caught in the needle valve fuel filters.
and checked all passageways.
Emulsion tubes all nice and clear.
So back in they go.
All 'O' rings replaced. Old on top new at bottom.
New ring for float value assembly.
Check float heights.
Check passages.
New 'O' rings
Gasket greased up and re-used.
Nice and clean and ready to go ganged up.
Ganging up.
Old blog i know, was just doing the carbs on my 1100G today. I use multi grips to grab tight or damaged screw heads, where you can get the grips in of course. Keep gs'en. chris Australia, netbikes com au.
ReplyDelete